The Original Spot Welding Machine Is Used And Maintained Like This

The operator needs to check whether the equipment of the spot welder is operating normally before using the spot welder. After the power is turned on, it runs for a period of time and carefully investigates. If there is no abnormality, the equipment function is normal. Then, check whether the spot welding needles of the spot welding machine are on the same level, and whether there is oxidation or black burnout. If so, you can use sandpaper to polish the spot welding needles.

When using the spot welder, it was investigated that the spot welded products did not explode and burn out. If so, the spot welder needs to be adjusted. In the process of spot welding, do not randomly gather data such as the height between the spot welder and the welding. Every hour, the spot welding pin needs to be polished with sandpaper. This is to remove the oxide that occurs during the operation of the spot welding machine. It should be noted that as long as the oxide appears on the spot welding pin, the grinding is required maintenance.

When welding, the orientation of the electrode rod should be adjusted first, so that when the electrode is just pressed to the weldment, the electrode arms insist on being parallel to each other. The selection of spot welder 2 and current conditioning switch stages can be selected according to the thickness of the weldment and the raw materials. After the power is turned on, the power indicator should be on. The pressure of the electrode can be adjusted by adjusting the tension spring nut and changing its tightness.