How To Choose A High Quality Spot Welder
Leave a message
Reasonably select the type of arc welder according to technical requirements. DC arc welding machine should be used under the following conditions: certain products, such as alloy steel, cast iron and non-ferrous metals, need to be welded by DC welding machine; some products require large penetration depth, such as high pressure pipe welding; in co-shield welding, Because of the reactive gas of co :, it will cause a strong metallurgical reaction in the welding wire.
As a result, the spatter is smooth, affecting the welding quality and the stability of the arc, thereby enhancing the stability of the arc and improving the welding quality. When the site is not ready for immersion conditions, a certain amount of inert gas argon needs to be added; wet arc welding in water; some In addition to welding, arc welding machines are also required for carbon arc gouging, plasma cutting and other processes.
Under normal conditions, such as welding ordinary low carbon steel workpieces, civil building structures and other general products, and inert gas shielded welding, etc., AC arc welding machines can be used. From the perspective of economic benefits, the welder model is reasonably selected. After comparing the energy consumption and cost of the AC / DC arc welding machine, the total cost of the AC arc welding machine is almost 60% to 70% of the DC arc welding machine. The boy who consumes only electricity has a rotating DC arc welding machine.
About 60% of the welders weigh only about 1/2. According to the data, AC arc welding machines are used instead of rotary DC arc welding machines. When manual welding is used, the energy consumption per 1kg of metal can save 3kW "h, and when automatic welding is used, it can save 2kW · h. If AC welding is feasible according to the process requirements, DC welding is generally not suitable.
Through the effect comparison, we can know the power saving effect of the silicon rectifier arc welder. Both are much higher than rotary DC arc welders. In particular, the energy saving effect of the inverter arc welding machine is more prominent, only about 60% of the rotary arc welding machine, and the weight is only 1/3 of the rotary welding machine. For resistance welding machines, the secondary circuit impedance, resistance and reactance The ratio is about 1: 2: 3, so the loss caused by AC power is very large.






