Home - News - Details

Safety Precautions For Spot Welders

1. On-site use shall be provided with a rain-proof, moisture-proof and sun-proof shed, and corresponding fire-fighting equipment shall be installed.

2. Within 10m of the welding site, oil, wood, oxygen cylinders, acetylene generators and other flammable and explosive items shall not be stacked.

3. Welding operations and cooperating personnel must wear labor protection articles in accordance with regulations. And must take safety measures to prevent accidents such as electric shock, high-altitude fall, gas poisoning and fire.

4. The secondary tap connection copper plate should be pressed tightly, and the terminal post should have a washer. Before closing, check the wiring nuts, bolts and other components in detail and confirm that they are intact and free from looseness or damage. There are protective covers at the terminals.

5. Before use, check and confirm that the primary and secondary wires are connected correctly, the input voltage complies with the nameplate of the electric welding machine, and know the type and scope of welding current of the spot welding machine. After connecting the power, it is strictly forbidden to touch the live parts of the primary circuit. Protective covers must be installed at the primary and secondary wiring.

6. When moving the spot welder, cut off the power supply. Do not move the welder by pulling the cable. When there is a sudden power failure during welding, the power should be cut off immediately.

7. When welding non-ferrous metals such as copper, aluminum, zinc, tin, lead, etc., it must be performed in a well-ventilated place. The welding personnel should wear gas masks or breathing filters.

8. When multiple spot welding machines are used centrally, they should be connected to a three-phase power network to balance the three-phase load. The grounding devices of multiple welding machines shall be connected by grounding electrodes, and shall not be connected in series.

9. It is strictly forbidden to carry out welding on the pressure pipelines in operation, containers with flammable and explosive materials, and stressed components.

10. When welding the preheating parts, a baffle should be provided to isolate the radiant heat emitted by the preheating weldment.


Send Inquiry

You Might Also Like